Maestro 100 Manuel d'utilisateur

Maestro 100 Series GSM/GPRS Modems Eco – Lite – 100M – Extended USER MANUAL Rev. 01

www.dayTelecom.com 4. Connect the modem to external device You can use the optional 'Y' cable to connect the modem's Su

www.dayTelecom.com CHAPTER 3: WORKING WITH MAESTRO 100 1. Checking the modem (using Microsoft Windows XP HyperTerminal as example) a. On

www.dayTelecom.com c. Choose the correct Com port and baud rate settings (9600bps for Eco; 115200bps for others, 8bits, no parity bit, 1

www.dayTelecom.com 2. Basic operation Followings are examples of some AT commands. Please refer to the AT command document for a full description

www.dayTelecom.com CHAPTER 4: SPECIFICATIONS  Quad Band GSM 850 / 900 / 1800 /1900 MHz  Support Data, SMS, Voice and Fax  Max power outp

www.dayTelecom.com CHAPTER 5: APPENDIX 1. Factory settings The modem has the following factory settings. Please refer to the AT command documen

www.dayTelecom.com CHAPTER 6: TROUBLESHOOTING 1. The modem’s LED does not light Check if the modem has been properly connected to a 5 - 32V pow

www.dayTelecom.com REVISION HISTORY Rev. Date Details Originated by 00 01 Mar 2007 First release Wallace Lee 01 30 Jan 2008 Second release Cecile

www.dayTelecom.com TABLE OF CONTENTS REVISION HISTORY ...

www.dayTelecom.com SAFETY PRECAUTIONS  The modem generates radio frequency (RF) power. When using the modem care must be taken on safety issues

www.dayTelecom.com CHAPTER 1: Introduction Maestro 100 is a ready-to-use GSM modem for voice, data, fax and SMS services. It also sup

www.dayTelecom.com c. 15-Pin D-Sub Female connector (RS232/Audio) The connector provides serial link and audio link to the modem Pin number

www.dayTelecom.com A cable, included in the package shall be used for power supply connection: 5-32V DC Supply Connector Micro-Fit 3.0 Fuse hol

www.dayTelecom.com Pin assignment Sub-D 15 (male) Sub-D 9 (female) Plug 4P4C 1 1 2 3 3 4 1 5 4 6 2 7 6 8 4 9 5 10 2 11 8 12 7 13 9 1

www.dayTelecom.com CHAPTER 2: INSTALLATION 1. Mounting the modem Use 2 pieces of M3 screw to mount the modem. When using optional DIN rail mou